Cal11 calculator
Search calculator...

Pool Pump Size Calculator Usa

Reviewed by Calculator Editorial Team

Determine the appropriate pool pump size for your pool in the USA with our professional pool pump size calculator. This tool helps you select the right pump based on your pool's volume and filtration needs.

How to Use This Calculator

Using our pool pump size calculator is simple:

  1. Enter your pool's volume in gallons or cubic feet
  2. Select the filtration rate (turnover rate) you want
  3. Click "Calculate" to get your recommended pump size

The calculator will provide you with the appropriate pump size in horsepower (HP) and gallons per hour (GPH).

Formula Used

The pool pump size is calculated using the following formula:

Pump Size (HP) = (Pool Volume × Turnover Rate) / 746 Pump Size (GPH) = Pool Volume × Turnover Rate

Where:

  • Pool Volume is the total water volume of your pool in gallons or cubic feet
  • Turnover Rate is how many times the pool's water is filtered per day (typically 4-6 times per day)
  • 746 is the conversion factor from gallons to cubic feet

Note: These calculations provide a general guideline. Actual pump requirements may vary based on specific pool conditions and equipment.

Worked Example

Let's calculate the pump size for a 20,000-gallon pool with a turnover rate of 5 times per day:

Pump Size (HP) = (20,000 × 5) / 746 ≈ 13.41 HP Pump Size (GPH) = 20,000 × 5 = 100,000 GPH

For this pool, you would need a pump with at least 1.5 HP capacity and 100,000 GPH flow rate.

Frequently Asked Questions

What is the standard turnover rate for pool filtration?
The standard turnover rate is typically 4-6 times per day, which means the entire pool water is filtered 4-6 times in 24 hours.
How do I measure my pool's volume?
You can calculate your pool's volume by multiplying its length, width, and average depth. For irregularly shaped pools, you may need to use a more precise measurement method.
What factors affect the required pump size?
Factors include pool volume, water temperature, filtration system efficiency, and the presence of debris or chemicals that may require additional filtration capacity.